Accessoires de soudeur

With a tool rental fleet that includes a full line of arc welders and welder accessories, we’re sure to have the parts you need to customize your welder and get the job done safely and efficiently. And with 24/7 customer support, United Rentals experts are here to assist you — day or night.

Welder Accessories FAQs

What are the tools and equipment used in welding?

  • In addition to the welding machine, you’ll need the following tools and equipment to ensure your safety. For personal equipment, some recommended items are safety goggles, an auto-darkening welding helmet, welding shoes, welding gloves, a welding jacket and ear protection. For welding tools, some recommended items are measuring tools, welding clamps, a chipping hammer, a wire brush, MIG pliers, a soap stone, a sheet metal gauge and an angle grinder. These two lists are in no way exhaustive. Please call United Rentals experts to learn more about the tools you need for your project.

What is a gouging torch?

  • An air arch gouging torch is used in gouging, joint preparation, crack and pore removal, chamfering, cutting, surface treating, and hole piercing of all metals.

What metal cannot be welded?

  • Most metals can be welded; however, certain methods of welding yield better results for specific metals. MIG welding is used for steel, stainless steel and aluminum alloys. FCAW welding is used on applications involving carbon steel, stainless steel and low-alloy steels. TIG welding is used for ferrous metals such as steel and nonferrous metals such as aluminum. SMAW welding is practical only on steel, stainless steel and cast iron.
welder rack 350
Code de catégorie/classe
975-0965

Welder Rack, 350 Amp, 4 Pack

  • Housing for multiple power sources
  • Volts : 460/480-575V input
  • Fork slots & lifting eye
welder rack 450
Code de catégorie/classe
975-0950

Welder Rack, 450 Amp, 4 Pack

  • Housing for multiple power sources
  • Two lifting eyes
  • Rugged skids
Bouteille d’acétylène
Code de catégorie/classe
975-6450

Acetylene Cylinder

  • Durable steel body
  • Includes protective screw-on cap
  • Fusible metal safety in the valve body
  • Meets DOT and/or ISO regulations
  • Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
  • Add this acetylene cylinder to your cart
Acetylene Cylinder
Code de catégorie/classe
975-6530

Acetylene Cylinder, Size 5, 330 cubic ft.

  • 251 LB/PO²
  • Actual volume of gas in the cylinder may fluctuate based on numerous conditions
  • Durable steel body
  • Meets DOT and/or ISO regulations
  • Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
  • Add this acetylene cylinder to your cart
Tête d’angle pour torche
Code de catégorie/classe
975-5130

Tête d’angle pour torche

welder lead 6 inch
Code de catégorie/classe
975-1810

Arc Welding Gun, Cable Lead 6 ft., Air Powered

  • MIG welding gun with 6' lead attached
  • Pneumatic-powered gun
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Male connector
  • Uses: Ideal for MIG or gas metal arc welding (GMAW)
  • Add this MIG welding gun to your cart now
Argon Tank Double Flow Meter
Code de catégorie/classe
975-5145

Argon Gas Regulator Double Flow Meter

  • Perfect for hooking up the same tank to multiple machines
  • Accurately measures and displays gas flow
  • Large, easy to read, shatter-resistant flow meter gauge
  • Great for Miller, Lincoln, Hobart, HTP and most other welders
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
  • Add this argon gas regulator double flow meter to your cart
Flow Meter pack shot
Code de catégorie/classe
975-7610

Argon Gas Regulator Flow Meter

  • Accurately measures and displays gas flow
  • Uses U.S. industry standard inlet and outlet connections
  • Large, easy to read, shatter-resistant flow meter gauge
  • Great for Miller, Lincoln, Hobart, HTP and most other welders
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
  • Add this argon gas regulator flow meter to your cart
Arc Cutting Torch
Code de catégorie/classe
975-6445

Torche de coupe à l’arc au carbone

Code de catégorie/classe
975-6446

Double Cut Bevel Torch Arm

  • Enables simultaneous carrying of 2 machine-type torches
  • Allows independent height, lead and degree of bevel adjustments
  • Permits adjustment of spacing between torches
  • Lightweight aluminum construction
  • Uses: Light industrial pipe beveling and cutting applications
  • Add this double cut bevel torch arm to your cart
Code de catégorie/classe
975-6750

Dual Torch Oxy/Acetylene Hose, 100 ft.

  • 100' length
  • Allows dual use of both oxygen and acetylene
  • 1/4" size hose
  • Maximum 200 psi
  • Uses: Use this oxyacetylene torch hose for oxygen and acetylene torch welding and cutting maintenance and repair projects
  • Add this dual torch oxy/acetylene hose to your cart
Code de catégorie/classe
975-6755

Dual Torch Oxy/Acetylene Hose, 100 ft.

  • 100' length
  • Allows dual use of both oxygen and acetylene
  • 1/4" size hose
  • Maximum 200 psi
  • Uses: Use this oxyacetylene torch hose for oxygen and acetylene torch welding and cutting maintenance and repair projects
  • Add this dual torch oxy/acetylene hose to your cart
Bouteille d’oxygène 125 pieds cubes
Code de catégorie/classe
975-6540

High Pressure Steel Oxygen Cylinder, 125 cubic ft.

  • Industrial steel cylinder
  • 249 cubic feet of oxygen
  • Commonly used in laser and plasma cutting
  • Meets DOT and/or ISO regulations
  • Uses: Ideal for oxygen welding applications and general metal fabrication
  • Add this high pressure steel oxygen cylinder to your cart
Oxygen Cylinder
Code de catégorie/classe
975-6545

High Pressure Steel Oxygen Cylinder, 250 cubic ft.

  • Industrial steel cylinder
  • 250 cubic feet of oxygen
  • Commonly used in laser and plasma cutting
  • Meets DOT and/or ISO regulations
  • Uses: Ideal for oxygen welding applications and general metal fabrication
  • Add this high pressure steel oxygen cylinder to your cart
Gougeage d’arc pneumatique
Code de catégorie/classe
975-2300

Industrial Grade Air Arc Gouging Torch

  • Heavy-duty carbon arc air gouging
  • Copper-clad electrodes
  • High-temperature safe handle
  • High heat- and abrasion-resistant cable hose
  • Uses: Shipyards or jobsites where gouging, joint preparation, removing of pores and cracks, chamfering, cutting, surface treatment, and hole piercing of all metals is required
  • Add this air arc gouger to your card
Code de catégorie/classe
975-6716

Inert Gas Purge Hose, 25 ft., with Fittings

  • Maximum working pressure: 200 LB/PO²
  • For MIG and TIG welding applications
  • Made of vinyl for durability
  • Connects the regulator flow meter to your welding machine or wire feeder 
  • Uses: Ideal for use before brazing, leak testing or flushing drainage lines
  • Add this inert gas purge hose to your cart
Long baril pour torche
Code de catégorie/classe
975-5125

Long baril pour torche

Code de catégorie/classe
975-5135

Baril court pour torche

Welder Cart
Code de catégorie/classe
975-5175

MIG Welding Cart 

  • Made with heavy gauge steel for strength and durability
  • Stable platform gives you a low center of gravity
  • Easy-rolling wheels for better rolling over cables and other jobsite obstacles
  • Adds portability and flexibility to your location on the jobsite
  • Uses: Use to carry oxygen and acetylene cylinders for MIG welding applications
  • Add this MIG welding cart to your cart
Code de catégorie/classe
975-5165

Baril de mélange pour montage oxyacétylénique

adapter tweco pack shot
Code de catégorie/classe
975-0345

One-piece Cam-Lok Terminal Adaptor 

  • Male plug on one end and a Cam-Lok receptacle on the other end
  • Allows interconnection to most other types of cable connectors
  • Heat- and oil-resistant cover
  • Compatible with Miller Tweco-style connectors
  • Uses: Ideal for welding cable connections for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
  • Add this one-piece cam-lok terminal adapter to your cart
Code de catégorie/classe
975-5170

Oxygen/Acetylene Rosebud Heating Tip

  • Copper gas tube with angled tip
  • Female threaded brass coupling with hex bolster
  • Multiflame heating head
  • Helpful in confined work spaces
  • Uses: Ideal for heat treating, straightening and priming
  • Add this oxygen/acetylene rosebud heating tip to your cart
Accessoire pour torche de coupe
Code de catégorie/classe
975-6580

Oxygen/Acetylene Torch Handle Attachment

  • Industrial quality torch for reliable oxygen/acetylene cutting operations
  • Two stainless steel needle valves
  • Tough extruded brass torch handle
  • Sturdy, reliable connectors
  • Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
  • Add this oxygen/acetylene torch handle attachment to your cart
Code de catégorie/classe
975-6410

Oxygen/Acetylene Welding and Cutting Torch Kit

  • Compact design stores easily
  • Regulators provide efficient and dependable control of gases
  • Includes reverse flow check valves for added safety
  • Readable and legible dual scale 2" gauges.
  • Uses: Ideal for oxygen-acetylene use to heat, weld, braze, silver-solder, and cut for auto repair, HVAC applications, and general maintenance.
  • Add this oxygen/acetylene welding and cutting torch kit to your cart
Code de catégorie/classe
975-2525

Pin and Sleeve Plug, 60 amp, Male

  • Copper-free aluminum with electrostatically applied epoxy
  • 60 amps
  • Engineered to withstand the toughest extremes in climate
  • Watertight
  • Uses: Ideal to help match high-current power sources
  • Add this pin and sleeve plug to your cart
product image not available
Code de catégorie/classe
975-1043

Pipe Beveling Manual Saddle Machine, 12-20 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
product image not available
Code de catégorie/classe
975-1044

Pipe Beveling Manual Saddle Machine, 20-26 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
product image not available
Code de catégorie/classe
975-1045

Pipe Beveling Manual Saddle Machine, 24-30 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
product image not available
Code de catégorie/classe
975-1030

Pipe Beveling Manual Saddle Machine, 3-8 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
product image not available
Code de catégorie/classe
975-1046

Pipe Beveling Manual Saddle Machine, 30-36 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
product image not available
Code de catégorie/classe
975-1040

Pipe Beveling Manual Saddle Machine, 6-12 in.

  • For shop or field applications
  • Precision spacer bolts, located on both sides of saddle
  • Can be used with most oxy/fuel or plasma machine torches
  • Use to create the angle formed between the edge of the end of a pipe or tube
  • Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
  • Add this pipe beveling manual saddle machine to your cart
Cutter Plasma Pack Shot
Code de catégorie/classe
975-7500

Plasma Cutter, 120-575 volt

  • Hand-held or machine torch
  • For cutting from 3/8" to 1-1/2"
  • 20-25' lead
  • Great for Miller, Lincoln, Hobart, HTP and most other welders
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
  • Add this plasma cutter to your cart
Coupeuse plasma
Code de catégorie/classe
975-7525

Plasma Cutter, 7/8 in. Capacity, 209-230 volt

  • Hand-held torch with 20' cable
  • Coupe du métal léger jusqu’à 7/8 po
  • 209-230 volt
  • Great for Miller, Lincoln, Hobart, HTP and most other welders
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
  • Add this plasma cutter to your cart
Code de catégorie/classe
975-2261

Potentiometer Extension Cable, 100 ft.

  • Extension cable to allow positioning in the shop or on the jobsite
  • For use with potentiometer for welding
  • Cable is built to be resistant of contaminants
  • 100' extension cord
  • Uses: Use to attach potentiometer in convenient jobsite location when you may be farther from your welding machine
  • Add this potentiometer extension cable to your cart
Code de catégorie/classe
975-2256

Potentiometer with Foot Pedal

  • Regulate amperage for TIG welding
  • Wide pedal with a low profile for stability
  • Non-slip traction pads
  • Provides a variable resistance output in a pedal-style housing
  • Uses: Ideal for regulating amperage for TIG welding
  • Add this potentiometer with foot pedal to your cart
Tig Welding Foot Control
Code de catégorie/classe
975-2264

Remote Amperage Control Foot Pedal for TIG Welding

  • Innovative smart connector for TIG torch
  • 6' cord
  • Provides optimum amperage needed for any TIG welding project
  • Provides a variable resistance output in a pedal-style housing
  • Uses: Ideal for regulating amperage for TIG welding
  • Add this remote amperage control foot pedal for TIG welding to your cart
Miller Welder Hand Remote
Code de catégorie/classe
975-2268

Remote Welding Hand Current and Contractor Control Box

  • Provides remote current control and on/off contactor switch
  • Oversize knob provides easy adjustment
  • Tough, durable steel housing
  • Convenient for use anywhere on the jobsite
  • Use for welding when work requires you to be 50' or more from your machine
  • Add this remote welding hand current and contractor control box to your cart
Cabtyre Cable
Code de catégorie/classe
975-5110

Rubber Cabtyre Cable, 100 ft.

  • Designed to absorb stress when tension is applied
  • Flame-retardant, water- and oil-resistant flexible grade PVC
  • Insulated and color coded
  • 100' cable
  • Uses: Use cable to supply main power to large and industrial appliances and machinery
  • Add this rubber cabtyre cable to your cart
Argon Hose with Fittings
Code de catégorie/classe
975-6705

Single-line Argon Hose, 50 ft., with Fittings

  • 50' length single-line
  • Abrasion-resistant cover
  • For use with argon gas only
  • Durable and safe connections
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring argon welding applications
  • Add this single-line argon hose to your cart
Extractor Pack Shot
Code de catégorie/classe
975-1505

Smoke and Fume Extractor, 50-200 CFM

  • Dimensions 13,4" by 26,8" by 15,8" for confined spaces
  • Poids : 37 lbs. for portability
  • Requiert une alimentation monophasée 230 V
  • Filtre facile à nettoyer avec un jet d’air comprimé externe
  • Uses: Ideal for clearing smoke and fumes in small shops, maintenance areas or small construction sites
  • Add this smoke and fume extractor to your cart now
Mobiflex Welding Fume Pack Shot
Code de catégorie/classe
975-1510

Smoke and Fume Extractor, 700-1 500 CFM

  • Dimensions 36" by 32" by 48"
  • Weight 201 lbs. and torque range 1 200-5 200 ft.-lbs.
  • Generous airflow between 735-1 500 CFM
  • Requires fewer filter changes
  • Uses: Ideal for clearing smoke and fumes in larger shops and jobsites
  • Add this smoke and fume extractor to your cart now
Code de catégorie/classe
975-6775

TIG Torch, 150 amp, Air Cooled

  • Ergonomic and comfortable grip
  • Welding amperage 1-150 amps
  • United Rentals will contact you to confirm hose and connector requirements
  • 60-degree head
  • Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
  • Add this 150-amp torch to your cart now
Code de catégorie/classe
975-6785

TIG Torch, 150 amp, Air Cooled, Flexible Head

  • Ergonomic and comfortable grip
  • Welding amperage 1-150 amps
  • United Rentals will contact you to confirm hose and connector requirements
  • 60-degree flexible head
  • Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
  • Add this 150-amp torch to your cart now
Code de catégorie/classe
975-6788

TIG Torch, 200 amp, Air Cooled

  • Ergonomic and comfortable grip
  • Welding amperage 1-200 amps
  • United Rentals will contact you to confirm hose and connector requirements
  • 60-degree head
  • Uses: General purpose welding torch for fabrication, maintenance, aerospace and other applications
  • Add this 150-amp torch to your cart now
Code de catégorie/classe
975-6765

Torch Acetylene Regulator

  • Légère et facile à utiliser
  • Threads: Acetylene 1/2" output, 5/8" input
  • United Rentals will contact you to confirm hose and connector requirements
  • To be used on acetylene cylinders
  • Uses: Light- to medium-duty welding, cutting and brazing applications
  • Add this acetylene regulator to your cart now
Code de catégorie/classe
975-6436

Combinaison pour torche oxyacétylénique

Code de catégorie/classe
975-6770

Régulateur de torche, oxygène

  • Légère et facile à utiliser
  • Threads: Oxygen 1/2" output, 7/8" input
  • United Rentals will contact you to confirm hose and connector requirements
  • To be used on oxygen cylinders
  • Uses: Light- to medium-duty welding, cutting and brazing applications
  • Add this oxygen regulator to your cart now
Code de catégorie/classe
975-0001

Twin Line Welding Hose, 50 ft.

  • Grade R or Grade T options available
  • 50' length
  • United Rentals will contact you to confirm hose and connector requirements
  • Allows use of gas for welding or cutting
  • Uses: Light- to medium-duty welding, cutting and brazing applications
  • Add this twin line hose to your cart now
Code de catégorie/classe
975-6510

Twin-line Oxygen/Acetylene Hose, 25 ft.

  • 25' length with inside dual hose
  • Oil-resistant covers
  • For use with oxygen/acetylene only
  • Durable and safe connections
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring oxygen/acetylene welding applications
  • Add this twin-line oxygen/acetylene hose to your cart
Code de catégorie/classe
975-6515

Twin-line Oxygen/Acetylene Hose, 50 ft.

  • 50' length with inside dual hose
  • Oil resistant covers
  • For use with oxygen/acetylene only
  • Durable and safe connections
  • Uses: Ideal for production line welding in factories, shipyards, construction sites and jobsites requiring oxygen/acetylene welding applications
  • Add this twin-line oxygen/acetylene hose to your cart
Chariot à bouteilles
Code de catégorie/classe
975-6400

Two-Tank Oxygen and Acetylene Cylinder Cart

  • Peut accueillir deux réservoirs sur la plaque de base
  • High rail design contains cylinders while being moved around the jobsite
  • Includes open tool tray
  • Adds portability and flexibility to your location on the jobsite
  • Uses: Use to carry oxygen and acetylene cylinders for welding applications
  • Add this two-tank oxygen and acetylene cylinder cart to your cart
Cylinder Cart Oxygen
Code de catégorie/classe
975-6404

Two-Tank Oxygen and Acetylene Cylinder Cart

  • Peut accueillir deux réservoirs sur la plaque de base
  • High rail design contains cylinders while being moved around the jobsite
  • Includes open tool tray
  • Adds portability and flexibility to your location on the jobsite
  • Uses: Use to carry oxygen and acetylene cylinders for welding applications
  • Add this two-tank oxygen and acetylene cylinder cart to your cart
Code de catégorie/classe
975-3020

Welder Cable AWG #1

  • 42,4 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 1
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0308

Welder Cable AWG #1/0, 100 ft. Rallonge

  • 53,5 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 0 or 1/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0309

Welder Cable AWG #1/0, 100 ft. Ground

  • 53,5 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 0 or 1/1
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0311

Welder Cable AWG #2/0, 100 ft. Rallonge

  • 67,4 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 00 or 2/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0310

Welder Cable AWG #2/0, 100 ft. Ground

  • 67,4 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 00 or 2/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0314

Welder Cable AWG #2/0, 50 ft. Rallonge

  • 67,4 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 00 or 2/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
welder cable pack shot
Code de catégorie/classe
975-0315

Welder Cable AWG #2/0, 50 ft. Ground

  • 67,4 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge 00 or 2/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
Code de catégorie/classe
975-0236

Welder Cable AWG #4/0, 50 ft., Tweco Ends

  • 107,2 square mm cross-section size
  • Flexible and durable casing
  • American wire gauge #4/0
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for manufacturing environments, powering resistance welding and arc welding equipment
  • Add this welding cable to your cart now
Black Welder Remote Extension Cord Coiled Up
Code de catégorie/classe
975-2254

Welder Remote Extension Cord

  • Extra long extension cord for welder remote control accessory
  • Compatible with multiple welder remote rentals
  • Increased convenience and safety
  • United Rentals will contact you to confirm requirements
  • Uses: Connect to a welder remote control for extra distance
  • Add this welder remote extension cord to your cart now
orange three-pronged welder remote coiled
Code de catégorie/classe
975-2232

Welder Remote, 3-prong

  • Permits remote adjustment of welder output
  • Compatible with multiple welder rentals
  • Increased convenience and safety
  • United Rentals will contact you to confirm requirements
  • Uses: Remotely adjust welder output
  • Add this welder remote to your cart now
Black Six Pin Welder Remote
Code de catégorie/classe
975-2231

Welder Remote, 6-pin

  • Permits remote adjustment of welder output
  • Compatible with multiple welder rentals
  • Increased convenience and safety
  • United Rentals will contact you to confirm requirements
  • Uses: Remotely adjust welder output
  • Add this welder remote to your cart now
Code de catégorie/classe
975-2255

Welder Remote, Wired

  • Permits remote adjustment of welder output
  • Compatible with multiple welder rentals
  • Increased convenience and safety
  • United Rentals will contact you to confirm requirements
  • Uses: Remotely adjust welder output
  • Add this welder remote to your cart now
Code de catégorie/classe
975-2250

Welder Remote, Wired, In-line Lead

  • Permits remote adjustment of welder output, includes in-line lead
  • Compatible with multiple welder rentals
  • Increased convenience and safety
  • United Rentals will contact you to confirm requirements
  • Uses: Remotely adjust welder output
  • Add this welder remote to your cart now
product image not available
Code de catégorie/classe
975-0966

Welder, 350 amp, 6-pack Multi-operator

  • Includes 6 welders stored securely in a durable rack
  • 350 amps
  • Lifting eyes, forklift slots or caster wheels available
  • Unité portative
  • Uses: Multiple operator welder rack to complete up to 6 welding jobs simultaneously
  • Add this welder rack to your cart now
product image not available
Code de catégorie/classe
975-9999

Welder, Generator and Compressor Kit

  • Kit includes welder, generator and air compressor
  • 12V battery charger and 12/24V battery booster
  • Crochet de levage et plateau pour la batterie intégrés
  • Compresseur rotatif à vis à 40 pcm
  • Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
  • Add this welding kit to your cart now
Code de catégorie/classe
975-2018

Welding Cable Lead #2/0, 10 ft., Ground

  • Cable lead with ground clamp
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
Welding Lead Pack Shot
Code de catégorie/classe
975-2210

Welding Cable Lead 100 ft., Extra

  • Cable lead to connect your stinger or ground
  • 100’
  • Operating temperatures range from -50°C to +105°C (-58°F to +221°F)
  • Calibre 30
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
Code de catégorie/classe
975-2012

Welding Cable Lead 12 ft., Ground

  • Cable lead with ground clamp
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
Black Welding Cable Lead, coiled
Code de catégorie/classe
975-0130

Welding Cable Lead 50 ft.

  • Cable lead to connect your stinger or ground
  • 50' length
  • Operating temperatures range from -50°C to +105°C (-58°F to +221°F)
  • Calibre 30
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
Welding Lead Pack Shot
Code de catégorie/classe
975-2205

Welding Cable Lead 50 ft., Extra

  • Cable lead to connect your stinger or ground
  • 50’
  • Operating temperatures range from -50°C to +105°C (-58°F to +221°F)
  • Calibre 30
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
welder lead
Code de catégorie/classe
975-1950

Welding Cable Lead 50 ft., Ground

  • Cable lead with ground clamp
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable to your cart now
Code de catégorie/classe
975-2005

Welding Cable Lead Whip With Stinger 5 ft., Ground

  • Lead with whip electrode holder and ground clamps
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine and grounding to the piece or floor
  • Add this welding cable with stinger and ground clamp to your cart now
welder cable pack shot
Code de catégorie/classe
975-0316

Welding Cable Lead With Stinger #2/0, 50 ft.

  • Electrode holder
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable whip with stinger to your cart
Code de catégorie/classe
975-2100

Welding Cable Lead With Stinger 100 ft., Ground

  • Lead with electrode holder and ground clamps
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable with stinger and ground clamp to your cart now
Code de catégorie/classe
975-2025

Welding Cable Lead With Stinger 25 ft., Ground

  • Lead with electrode holder and ground clamps
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable with stinger and ground clamp to your cart now
Code de catégorie/classe
975-2050

Welding Cable Lead With Stinger 50 ft., Ground

  • Lead with electrode holder and ground clamps
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable with stinger and ground clamp to your cart now
stinger and whip
Code de catégorie/classe
975-1960

Welding Cable Whip With Stinger

  • Electrode holder
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable whip with stinger to your cart
cutting rig
Code de catégorie/classe
975-0850

Welding Cutting Outfit with Tote

  • Light- to medium-duty portable outfit
  • Includes: twin hose, cutting attachment, torch handle, regulators
  • Popular for general maintenance work
  • Tote is convenient for portability on the jobsite
  • Uses: Ideal for production line welding in factories, shipyards, construction sites, and jobsites, for metal fabrication, maintenance, and repair
  • Add this welding cutting outfit with tote to your cart
Code de catégorie/classe
975-5150

Welding Flow Gauge Regulator, Argon Gas

  • Argon regulator with flow meter
  • Calibrate argon, helium and carbon dioxide gases
  • Polycarbonate flow tube and housing are shock resistant for maximum durability
  • Control valve reduces the input pressure
  • Uses: Ideal for MIG and TIG welding applications for precise gas flow regulation
  • Add this welding flow gauge regulator for argon to your cart
Code de catégorie/classe
975-5155

Welding Flow Gauge Regulator, Nitrogen

  • Zinc aluminum housing cap for added strength
  • Easy-to-adjust color-coded knob
  • Single stage regulator with a 1/4'' flare fitting
  • Control valve reduces the input pressure
  • Uses: Ideal for nitrogen welding to minimize oxidation
  • Add this welding flow gauge regulator for nitrogen to your cart
Code de catégorie/classe
975-6505

Welding Flow Gauge Regulator, Oxygen

  • Medium- to heavy-duty
  • 2" steel gauge
  • One-piece encapsulated seat design
  • Control valve reduces the input pressure
  • Uses: Ideal to regulate oxygen welding gas pressure and flow
  • Add this welding flow gauge regulator for oxygen to your cart
product image not available
Code de catégorie/classe
975-3110

Système de récupération de flux de soudage

  • Weld flux recycling system
  • Ideal accessory for arc welding
  • Convenient and durable
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for arc welding, cleaning the work area and saving flux
  • Add this flux recovery system to your cart now
Clamp Ground
Code de catégorie/classe
975-0127

Welding Ground Clamp , 4/0 Cable Size

  • Copper cast upper and lower jaws
  • Insulated spring
  • Ball point screw to use when securing the welding cable to the ground clamp
  • Connect the metal enclosure of your welding machine to the ground
  • Uses: Use in any welding task on the jobsite to ground your welding machine
  • Add this welding ground clamp to your cart
Code de catégorie/classe
975-2010

Welding Ground Clamp With Whip

  • Copper cast upper and lower jaws
  • Insulated spring
  • Safely ground your welding lead to steel
  • Ground clamp
  • Uses: Use in any welding task on the jobsite to ground your welding circuit
  • Add this welding ground clamp to your cart now
Clamp Ground
Code de catégorie/classe
975-0126

Welding Ground Clamp with Whip

  • 2-4' whip
  • Copper cast upper and lower jaws
  • Insulated spring
  • Connect the metal enclosure of your welding machine to the ground
  • Uses: Use in any welding task on the jobsite to ground your welding machine
  • Add this welding ground clamp to your cart
Code de catégorie/classe
975-0125

Welding Ground Clamp, Chassis, 25 ft.

  • 25' cable
  • Copper cast upper and lower jaws
  • Insulated spring
  • Connect the metal enclosure of your welding machine to the ground
  • Uses: Use in any welding task on the jobsite to ground your welding machine
  • Add this welding ground clamp to your cart
black welding helmet
Code de catégorie/classe
975-4310

Casque de soudage

  • Adjustable strap
  • Durable lens shade
  • Functional and clean
  • United Rentals will contact you to confirm requirements
  • Uses: Ideal for protecting welding operators from sparks, heat, burns and UV light
  • Add this welding helmet to your cart now
Code de catégorie/classe
975-2017

Welding Lead With Stinger #2/0, 10 ft.

  • Electrode holder
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable whip with stinger to your cart
Code de catégorie/classe
975-2015

Welding Lead with Stinger 10 ft., Ground

  • Lead with electrode holder and ground clamps
  • Male connector
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Strong spring and copper-plated jaw
  • Uses: Ideal for hooking up to a welding extension or a welding machine
  • Add this welding cable with stinger and ground clamp to your cart now
blue welding positioner
Code de catégorie/classe
975-5200

Welding Positioner, 2-3 Jaws

  • Includes 2-3 jaws, depending on model
  • Adjust and rotate the plate 360 degrees
  • Continuously work on a flat surface
  • Durable steel jaws
  • Uses: Keep the welding piece in place and rotate 360 degrees for increased safety and convenience
  • Add this welding positioner to your cart now
Code de catégorie/classe
975-6500

Welding Regulator/Gauge, Acetylene

  • Medium- to heavy-duty
  • 2" steel gauge
  • Rugged brass body
  • Control valve reduces the input pressure
  • Uses: Ideal to regulate acetylene welding gas flow and pressure
  • Add this welding flow gauge regulator for acetylene to your cart
Code de catégorie/classe
975-2260

Welding Remote Extension Cable, 100 ft. Cord

  • Allows mounting your wired marine remote in convenient location
  • Ideal for heavy-duty industrial use
  • Compatible with most welders on the market
  • 100' extension cord
  • Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
  • Add this welding remote extension cable to your cart
Code de catégorie/classe
975-2243

Welding Remote Extension Cable, 100 ft. Cord, 14 Pin

  • Allows mounting your wired marine remote in convenient location
  • Ideal for heavy-duty industrial use
  • Compatible with most welders on the market
  • 100' extension cord
  • Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
  • Add this welding remote extension cable to your cart
Code de catégorie/classe
975-2248

Welding Remote Extension Cable, 75 ft. Cord, 6 Pin

  • Allows mounting your wired marine remote in convenient location
  • Ideal for heavy-duty industrial use
  • Compatible with most welders on the market
  • 75' extension cord
  • Uses: Ideal for use with a welder for added control convenience when working away from your welder on the jobsite
  • Add this welding remote extension cable to your cart
product image not available
Code de catégorie/classe
975-2220

Welding Remote Prong Connector, 3 Pin to 14 Pin

  • Use for 3 pin to 14 pin
  • Oxygen-free, oil-resistant wire
  • Reliable amp power flow
  • Locking plug
  • Uses: Ideal for use to bring generator power to welder
  • Add this welding remote prong connector to your cart
Yellow Welding Rod Oven
Code de catégorie/classe
975-6727

Four pour tiges de soudage 10 lb

  • 115/220V
  • Légère et portative
  • Preset or thermostatic temperature control
  • Holds up to 20 lbs. of electrodes
  • Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
  • Add this welding rod oven to your cart now
product image not available
Code de catégorie/classe
975-6729

Four pour tiges de soudage 20 lb

  • Élévateur de tige pour un retrait rapide
  • Thermostat ajustable disponible
  • Peut contenir des électrodes de 14 à 18 po
  • Single-phase, 70 watt
  • Uses: Ideal for holding 14-18" electrodes in preparation for welds, preventing damage, moisture and defects
  • Add this welding rod oven to your cart now
Four pour tiges de soudage, capacité de 350 lb
Code de catégorie/classe
975-6724

Four pour tiges de soudage 350 lb

  • Design compact avec contrôles en retrait
  • Tablettes faciles à enlever
  • Contrôle de la température par thermostat
  • Nesting feet and sockets for safe stacking
  • Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
  • Add this welding rod oven to your cart now
product image not available
Code de catégorie/classe
975-6726

Four pour tiges de soudage 50 lb

  • 120/240V
  • Thermostat ajustable disponible
  • Wheels and handles available
  • Légère et portative
  • Uses: Ideal for holding electrodes in preparation for welds, preventing damage, moisture and defects
  • Add this welding rod oven to your cart now
Welding Safety Screen pack shot
Code de catégorie/classe
975-7800

Welding Safety Screen Accessory

  • Safety accessory for welding rigs
  • Made from flame-resistant material
  • Can stand up to the heat of welding work
  • Secure and easy setup
  • Uses: Ideal for enclosing your welding work area to contain spatter and sparks
  • Add this welding safety screen to your cart now
Marteau pour silex
Code de catégorie/classe
975-6585

Welding Torch Single Flint Striker

  • Long-life lighter with generous flint
  • Rotating wear-resistant file
  • Nickel-plated hood
  • Ignite your torch under all working conditions
  • Uses: Ideal for safely lighting welding and cutting torches
  • Add this welding torch single flint striker to your cart
product image not available
Code de catégorie/classe
975-3060

Dévidoir de fil de plomb

  • Fonctionne pour le soudage MIG, pulsé, RMD et FCAW
  • Single or 3-phase
  • Entrée : 14 à 100 V c.c. ou 250 à 575 V c.a.
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Uses: Ideal for MIG, Pulse, RMD and FCAW welding
  • Add this welding wire feeder lead to your cart now
black Wire Feeder
Code de catégorie/classe
975-0157

Wire Feeder MIG

  • Accessibilité par un rouleau d’entraînement
  • Contrôle à distance de la tension
  • Étui robuste et durable
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Uses: Ideal for MIG welding
  • Add this welding feeder to your cart now
Wire Feeder Mig Pack shot
Code de catégorie/classe
975-0156

Wire Feeder MIG, Semiautomatic

  • Sélection de la plage de vitesse
  • Étui robuste et durable
  • Interrupteur de verrouillage pour la gâchette disponible
  • Commutateur de polarité de la tension disponible
  • Uses: Ideal for MIG welding
  • Add this welding feeder to your cart now
product image not available
Code de catégorie/classe
975-3100

Wire Feeder Submersed Arc Welding Tractor

  • Fonctionne pour la progression de l’arc en submersion
  • Léger et compact robuste
  • Auto-propulsé et direction automatique
  • Cable jacketed for maximum flexibility and resistance to cuts, tears, and abrasions
  • Uses: Designed for submerged arc progress
  • Add this welding feeder to your cart now
Code de catégorie/classe
975-5140

Wraparound Pipe Marker

  • Includes several measurements for utility pipes
  • Légère et portative
  • Facile à utiliser
  • Several pipe sizes are available
  • Uses: Ideal for marking a straight line on various pipes, including water, gas and other utilities
  • Add this pipe marker to your cart now