2,000W Portable Light Stand, Metal Halide

• 2 1,000-watt light fixtures
• Height adjustable between 5' to 8'
• 25' power cord
• Unit weight 42 lbs.
• Add this light stand to your cart now

55W Explosion-Proof Fluorescent Light, 4 ft.

• Reflectors included for redirection
• 55 watt bulbs
• 4' wide
• Efficient cool white light
• Add this work light to your cart now

Adaptateur de mèche sds max à sds

Adaptateur de mèche sds max à cannelure

Air Chain Hoist, 1,5-3 Tons

• Facile à utiliser
• Single chain and double chain options for various loads
• For heavy-duty lifting loads
• Contrôle de vitesse variable
• Add this air hoist to your cart now

Air Chain Hoist, 16-20 Tons

• Single and double chain operation
• Cycle de service illimité pour une opération continue
• For heavy-duty lifting loads
• Contrôle de vitesse variable
• Uses: Ideal for lifting engine blocks, dies or other equipment with eye bolts
• Add this air hoist to your cart now

Air Chain Hoist, 30 Tons

• Facile à utiliser et à entretenir
• Cycle de service illimité pour une opération continue
• Maximum lifting capacity 60 000 lbs.
• Contrôle de vitesse variable
• Add this air hoist to your cart now

Air Chain Hoist, 50 Tons

• Contrôle de vitesse variable
• Minimum headroom
• For heavy-duty lifting loads
• Facile à utiliser et à entretenir
• Add this air hoist to your cart now

Air Chain Hoist, 6-12 Tons

• Facile à utiliser
• Single chain, double chain and reconfigured double chain options for various loads
• For heavy-duty lifting loads
• Contrôle de vitesse variable
• Add this air hoist to your cart now

Air Circulating Fan, 28-36 in.

• Tilts for directional air adjustment
• Ready for floor use
• Lighweight and compact for portability
• Durably constructed for indoor/outdoor use
• Uses: Ideal for cooling and drying jobsite spaces
• Add this air circulating fan to your cart now

Air Concrete Saw, 12-14 in.

• Hand-held operation
• Profondeur de coupe pouvant aller jusqu’à 4 po
• Use 12-14" blades
• Low maintenance and easy to operate
• Uses: Ideal for rapid, simple on-site cutting or adjusting building components where pneumatic power is available
• Add this concrete saw to your cart now

Bouchardeuse pneumatique à béton, 5 têtes

• Ideal for removing concrete or epoxy, surface preparation and leveling concrete
• Compact and lightweight walk-behind equipment
• Jusqu’à 3 000 bpm
• Low vibration for reduced strain on operator
• Add this concrete scabbler to your cart now

Air Hacksaw, Heavy-Duty

• Cutting capacity up to 30" pipe diameter
• Pinces ajustables disponibles
• Jusqu’à 350 coups par minute
• Pneumatic powered
• Uses: Ideal for cutting through metal piping where pneumatic power is available
• Add this hacksaw to your cart now

Air Hacksaw, Light-Duty

• Légère et facile à utiliser
• Une coupe lisse et sans bavures réduit le meulage au final
• Vitesse ajustable pouvant aller jusqu’à 1 200 coups à la minute
• Pneumatic powered
• Uses: Ideal for cutting through metal piping where pneumatic power is available
• Add this hacksaw to your cart now

Air Impact Socket 1 in. Drive

• 2 1/8" or 54 mm deep
• Heavy-duty hardened steel
• Designed to be used with air equipment
• Torque down or loosen fasteners
• Add this impact socket to your cart now

Air Impact Wrench, 1 in. Drive, #5 Spline

• #5 spline drive
• Comfortable D-handle with inside trigger
• Airflow up to 85 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1 in. Drive, D-handle

• 1" drive
• Comfortable D-handle outside trigger
• Airflow up to 48 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1 in. Drive, Pistol Grip

• 1" drive
• Détente ergonomique
• Airflow up to 59 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Impact Wrench, 1-1/2 in. Drive

• Maximum torque up to 3 500 ft.-lbs.
• Comfortable D-handle with inside trigger
• Airflow up to 95 CFM
• Torque down or loosen fasteners quickly
• Add this impact wrench to your cart now

Air Mover/Dryer, 3-speed, 2 700 Cubic Ft. per Hour

• Three positions for easier drying angles
• Underside drying vent
• Three-speed motor allows for great control over drying
• Built-in power circuit breaker allows for multiple units to work at the same time
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Air Mover/Dryer, 3-speed, 2 700 Cubic Ft. per Hour

• Three positions for easier drying angles
• Underside drying vent
• Three-speed motor allows for great control over drying
• Built-in power circuit breaker allows for multiple units to work at the same time
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Air Orbital Floor Sander, Hand-held

• Silencieux intégré qui réduit le bruit
• Régulateur ajustable pour un contrôle de la vitesse
• Double action pour des finitions sans spirales
• Ideal for heavy-duty sanding
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this orbital sander to your cart now

Air Paving Breaker, 30 lb. class

• Ideal for breaking up a few inches of concrete or asphalt
• Standard hex chuck size 1" by 4-1/4"
• Reduced kickback decreases operator fatigue
• Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Paving Breaker, 35 lb. class

• Ideal for breaking up a few inches of concrete or asphalt
• Standard hex chuck size 1" x 4-1/4"
• Reduced kickback decreases operator fatigue
• Jusqu’à 1 850 bpm
• Add this pavement breaker to your cart now

Air Paving Breaker, 60 lb. class

• Standard hex chuck size 1-1/4" by 6"
• Air inlet 1/2" male
• Jusqu’à 1 680 bpm
• Use Cases: Ideal for breaking u p and removing up to a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Paving Breaker, 90 lb. class

• Standard hex chuck size 1-1/4" x 6"
• Weight 91 lbs.
• Jusqu’à 1 350 bpm
• Use Cases: Ideal for breaking up a few inches of concrete or asphalt
• Add this pavement breaker to your cart now
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Air Portable Band Saw

• Fast cutting capacity up to 7"x 7"
• Weight as low as 13,66 lbs.
• Vitesse variable de la lame jusqu’à 295 tours/minute
• Manufacturers include Portaband and other popular brands
• Uses: Ideal as your go-to tool for remodeling, construction when working with plates, pipes and other jobsite materials
• Add this band saw to your cart now

Coupe-rivet pneumatique

• Léger 30 lb
• Jusqu’à 1 140 bpm
• Air flows between 42-46 CFM at 90 psi
• Use Cases: Remove rivets from walls and bridges for medium demolition work
• Add this rivet buster to your cart now
• Additional charges apply for Tool Steel
• United Rentals will contact you to confirm your requirements

Air Rock Drill Whirlibit, 1-1 5/8 in.

• 1-1 5/8 in.
• Hexagonal shape
• Industrial-strength steel composition
• Heavy-duty metal construction
• Uses: Ideal for drilling dowel holes
• Add this rock drill whirlibit to your cart now

Air Rock Splitter, Heavy Duty

• Unit dimensions 50-3/4″ long
• Size hole required 1-3/4" and 26" deep
• For heavy-duty demolition work
• Vibration-free and lightweight to reduce strain on operator
• Add this rock splitter to your cart now

Air Rotary Hammer Drill, 1-in. Cap

• Up to 1" diameter holes with solid carbide-tipped bits
• Up to 3" diameter holes with carbide core bits
• Water hookup at depth gauge to help protect against bit sparking
• Built-in oiler for air motor
• Add this air rotary hammer drill to your cart

Air Torque Wrench, 3/4 in.

• Système de boulonnage qui s’étire avec la charge
• Torque range from 95-1 300 ft.-lbs.
• 24 pcm à 75 lb/po²
• Ergonomic trigger handle
• Uses: Ideal for light construction, automotive or industrial applications
• Add this torque wrench to your cart now

Air Walk-behind Concrete Saw, 12-20 in.

• Profondeur de coupe pouvant aller jusqu’à 8 po
• Uses 12"-20" blades
• Low maintenance and easy to operate
• Pneumatic powered
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick, concrete and stone
• Add this concrete saw to your cart now

Air Winch, 10 000 lbs.

• Pulls single line up to 10 000 lbs.
• Required pressure 90 PSI
• Wire rope diameter 1/4" recommended and capacity up to 228'
• Inlet 1/2" and hose size 3/4"
• Add this air winch to your cart now

Air Winch, 2 Tons

• Inlet 1/2" and hose size 3/4"
• Wire rope diameter 1/4" recommended
• Required pressure of 90 PSI
• Pulls single line up to 4 000 lbs.
• Uses: Ideal for lifting or suspending heavy materials and equipment
• Add this air winch to your cart now

Aluminum Gantry Crane, 2 Tons, 10-ft. Span

• Légère et portative
• Adjustable lifting height and 10' span
• Facile à assembler
• Durable aluminum construction
• Add this gantry crane to your cart now

Aluminum Gantry Crane, 5 Tons, 6- to 16.5-ft. Span

• Légère et portative
• Adjustable lifting height and up to 16' span
• 16 500 lb. load test
• Se déplace de façon sécuritaire avec une charge entière
• Add this gantry crane to your cart now

Angle Grinder, 4-1/2 in., Cordless, Electric Powered

• Jusqu’à 9 000 tours/minute
• Poignée latérale à 2 ou 3 positions
• Commutateur à gâchette ou palette disponible
• Poignée ergonomique
• Uses: Ideal for weld preparation and smoothing, rust removal, deburring and blending
• Add this angle grinder to your cart now

Angle Grinder, Electric-powered, 11 000 rpm, 4 1/2 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 11 000 rpm, 5 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 11 000 rpm, 6 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Angle Grinder, Electric-powered, 6 000-8 500 rpm, 7-7 1/2 in.

• 5/8-11" spindle thread
• Multiposition side handle lets you work in tight spaces
• Spindle lock allows for quick and easy wheel changes
• AC/DC capability allows you to work off of most generators and welders
• Add this angle grinder to your cart

Annular Core Cutter, 1/2 in. by 2 in., Steel

• Cutting depth 2"
• Shank diameter 3/4"
• Cutter diameter 1/2"
• Steel material adds to high-speed efficiency
• Uses: Ideal for drilling holes in steel to reduce need for pre-drilling or step drilling
• Add this annular core cutter to your cart today

Arc Welder 150-amp TIG Inverter, 115/230 Volts

• À l’électrode et TIG
• 115/230 dual voltage
• Facile à porter, comprend une pince de travail
• Fonctions de pulsation disponibles
• Uses: Arc welding for light- to medium-duty fabrication
• Add this arc welder to your cart now

Arc Welder, 300 amp Inverter

• MIG, GMAW-P, à l’électrode, TIG, FCAW et CAC-A
• Entrée : single-phase or 3-phase
• Sortie : 10-35 V, 5-400 A
• Smooth, more consistent arc that can be tailored to match application, material, fit-up and welder technique
• Uses: Ideal for worksites where multiple types of metal will need work and versatility is needed for use of stick, MIG, TIG, FCAW, and CAC-A welding
• Add this arc welder to your cart now

Arc Welder, LP/Gas Powered, 250 amp

• 250 amp operation
• Produces stick, TIG, MIG and flux-cored outputs
• Sur remorque pour la capacité de transport
• Uses: Ideal for construction jobsites, or maintenance/repair applications that demand power where electrical outlets aren’t available
• Add this arc welder to your cart

Bandsaw Floor, 7 in. x12 in., Horizontal/Vertical, Electric Powered

• Angles de coupe ajustables de 45° à 90°
• Faite en fer forgé
• Interruption automatique lors de la coupe d’extrémités
• Electric powered
• Uses: Ideal for ripping wood and cutting irregular shapes
• Add this bandsaw to your cart now

Bandsaw, Floor, 8 in. by 14 in., Hor/Vert, Electric

• Adjustable hydraulic downfeed system
• Heavy-duty geared head transmission for quick speed change<br>
• Easy-access control panel
• Horizontal or vertical
• Uses: Ideal for ripping wood and cutting irregular shapes
• Add this bandsaw to your cart now

Batterie de rechange 2 radio émetteur-récepteur

Belt Sander, 3 in. by 20 in., Electric Powered

• Variable speed, up to 1 400 surface feet per minute (SFPM) available
• Dust collection receptacle available
• Weight as low as 9 lbs.
• Level, shape and finish wood and other materials
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this belt sander to your cart now

Bench Grinder, 8 in., Electric Powered

• Grinder wheel width 8"
• 3/4 horsepower induction motor, 3 600 RPM
• Rugged cast-iron base
• Réinitialisations d’outil ajustables
• Uses: Ideal for grinding or buffing pieces on a firm, workbench surface
• Add this bench grinder to your cart now

Mèche de carbure 1 1/2 po

Mèche de carbure 1 1/2 po

Mèche de carbure 1 1/4 po

Mèche de carbure 1 1/8 po

Mèche de carbure 1 3/8 po

Mèche en carbure 1 po

Mèche de carbure 1/2 po

Mèche de carbure 1/4 po

Mèche de carbure 3/16 po

Mèche de carbure 3/4 po

Mèche de carbure 3/8 po

Mèche de carbure 5/16 po

Mèche de carbure 5/8 po

Mèche de carbure 7/8 po

Mèche de carbure 9/16 po

Mèche en carbure, formats divers

Mèche de carbure sds 1 po x 13 po

Mèche de carbure sds 1 po x 16 po

Mèche de carbure sds 1/2 po x 12 po

Mèche de carbure sds 1/2 po x 18 po

Mèche de carbure sds 1/2 po x 4 po

Mèche de carbure sds 1/2 po x 6 po

Mèche de carbure sds 1/4 po x 12 po

Mèche de carbure sds 1/4 po x 4 po

Mèche de carbure sds 1/4 po x 6 po

Mèche de carbure sds 3/16 po x 12 po

Mèche de carbure sds 3/16 po x 4 po

Mèche de carbure sds 3/16 po x 7 po

Mèche de carbure sds 3/4 po x 12 po

Mèche de carbure sds 3/4 po x 16 po

Mèche de carbure sds 3/8 po x 22 po

Mèche de carbure sds 3/8 po x 4 po

Mèche de carbure sds 3/8 po x 6 po

Mèche de carbure sds 3/8 po x 8 po

Mèche de carbure sds 5/16 po x 6 po

Mèche de carbure sds 5/8 po x 13 po

Mèche de carbure sds 5/8 po x 22 po

Mèche de carbure sds 5/8 po x 6 po

Mèche de carbure sds 5/8 po x 8 po

Mèche de carbure sds 5/8 po x 9 po

Mèche de carbure sds 7/16 po x 4 po

Mèche de carbure sds 7/8 po x 10 po

Mèche de carbure sds 7/8 po x 16 po

Mèche de carbure sds 7/8 po x 6 po

Mèche de carbure sds 9/16 po x 10 po

Mèche de carbure sds 9/16 po x 4 po

Mèche de carbure, cannelure de 1 1/2 po

Mèche de carbure, cannelure de 1 1/4 po

Mèche de carbure, cannelure de 1 1/8 po

Mèche en carbure, cannelure de 1 po

Mèche de carbure, cannelure de 1/2 po

Mèche de carbure, cannelure de 1/4 po

Mèche de carbure, cannelure de 3 1/2 po

Mèche de carbure, cannelure de 3/4 po

Mèche de carbure, cannelure de 3/8 po

Mèche de carbure, cannelure de 5/8 po

Mèche de carbure, cannelure de 7/8 po

Mèche de carbure, cannelure de 9/16 po

Couronne de carottage pour béton avec cannelure/sds 2 1/2 po

Couronne de carottage pour béton avec cannelure/sds 3 po

Couronne de carottage pour béton avec cannelure/sds 4 1/2 po

Couronne de carottage pour béton avec cannelure/sds 4 po

Mèche à béton avec cannelure de 1 1/4 po x 15 à 24 po

Mèche à béton avec cannelure de 1 1/4 po x 4 à 14 po

Mèche à béton avec cannelure de 1 1/8 po x 4 à 14 po

Mèche à béton avec cannelure de 1 po x 15 à 24 po

Mèche à béton avec cannelure de 1 po x 4 à 14 po

Mèche à béton avec cannelure de 1/2 po x 4 à 14 po

Mèche à béton avec cannelure de 3/4 po x 15 à 24 po

Mèche à béton avec cannelure de 3/4 po x 4 à 14 po

Mèche à béton avec cannelure de 3/8 po x 4 à 14 po

Mèche à béton avec cannelure de 5/8 po x 4 à 14 po

Mèche à béton avec cannelure de 7/8 po x 4 à 14 po

Mèche à béton avec cannelure de 9/16 po x 4 à 14 po

Couronne de carottage en carbure 1 3/4 po

Couronne de carottage en carbure 2 1/2 po

Couronne de carottage en carbure 2 3/4 po

Couronne de carottage en carbure 2 po

Couronne de carottage en carbure 3 1/2 po

Couronne de carottage en carbure 3 po

Couronne de carottage en carbure 4 po

Couronne de carottage en carbure 5 po

Couronne de carottage en carbure 6 po

Couronne diamantée de carottage, 2 1/2 po

Couronne diamantée de carottage, 4 po

Mèche pour perceuse sds plus 3/4 po

Mèche pour perceuse sds plus 3/8 po

Mèche hexagonale 3/4 po avec burin plat de 1 po x 12 po

Mèche carbure roche D, filet 1 1/2 po

Mèche carbure roche D, filet 1 1/4 po

Mèche carbure roche D, filet 1 3/4 po

Mèche carbure roche D, filet 1 5/8 po

Mèche carbure roche D, filet 1 7/8 po

Mèche carbure roche D, filet 2 1/2 po

Mèche carbure roche D, filet 2 po

Mèche carbure roche D, filet 3 po

Mèche carbure roche H, filet 1 1/2 po

Mèche carbure roche H, filet 1 3/4 po

Mèche carbure roche H, filet 1 3/8 po

Mèche carbure roche H, filet 1 5/8 po

Mèche carbure roche H, filet 1 7/8 po

Mèche carbure roche H, filet 2 1/2 po

Mèche carbure roche H, filet 2 1/4 po

Mèche carbure roche H, filet 2 po

Mèche carbure roche H, filet 3 po

Mèche de marteau rotatif 1 1/4 po

Mèche de marteau rotatif 1 po

Mèche de marteau rotatif 11/16 po

Mèche de marteau rotatif 2 po

Mèche de marteau rotatif 3/4 po

Mèche de marteau rotatif 3/8 po

Mèche de marteau rotatif 5/8 po x 10 po

Mèche de marteau rotatif 5/8 po x 16 po

Mèche de marteau rotatif 7/8 po

Mèche de marteau rotatif 9/16 po

Mèche pour marteau rotatif 9/16 po

Mèche sds max 1 1/2 po x 22 1/2 po

Mèche sds max 1 1/4 po x 10 po

Mèche sds max 1 1/4 po x 16 po

Mèche sds max 1 1/4 po x 18 po

Mèche sds max 1 1/4 po x 8 po

Mèche sds max 1 1/8 po x 10 po

Mèche sds max 1 1/8 po x 14 po

Mèche sds max 1 1/8 po x 18 po

Mèche sds max 1 1/8 po x 22 1/2 po

Mèche sds max 1 3/4 po x 18 po

Mèche sds max 1 3/8 po x 18 po

Mèche sds max 1/2 po x 12 po

Mèche sds max 2 po x 18 po

Mèche sds max 3/4 po x 12 po

Mèche sds max 3/4 po x 16 po

Mèche sds max 3/4 po x 31 po

Mèche sds max 3/4 po x 8 po

Mèche sds max 5/8 po x 12 po

Mèche sds max 5/8 po x 16 po

Mèche sds max 5/8 po x 18 po

Mèche sds max 5/8 po x 8 po

Mèche sds max 7/8 po x 8 po

Mèche sds max 9/16 po x 12 po

Mèche sds max 9/16 po x 16 po

Mèche sds max 9/16 po x 8 po

Block Saw, 14 in., Gas Powered

• Facile à installer et à transporter
• Profondeur de coupe maximum de 5 po
• Up to 5,5 horsepower engine
• Lame de 14 po
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick and stone; personal and commercial use
• Add this block saw to your cart now

Clé avec douille carrée 3 1/8 po

Cable Puller, 10 000 lbs., Electric Powered

• Pulling speed up to 16 feet per minute (FPM) at no load
• Mobile boom accessory available
• Features high and low pulling speeds
• Easily change speeds with foot pedal
• Uses: Ideal for pulling cable through conduit for electrical or communication utilities work
• Add this cable puller to your cart now

Chain Hoist, 1-2 Tons, Electric Powered

• Wear-resistant, nickel-plated load chains
• Adjustable lifting speed
• Plug-in pendant and connectors available
• Maximum lifting capacity 4 000 lbs.
• Add this electric hoist to your cart now

Chain Hoist, 15 Tons, Manual

• Maximum capacity 30 000 lbs.
• Construction en acier robuste
• Corrosion-resistant steel
• Protection contre les surcharges disponibles
• Add this manual hoist to your cart now

Chain Hoist, 3 Tons, Electric Powered

• Lift speed of up to 5,5 feet per minute (FPM)
• Tension faible ou élevée
• Crochets en acier forgé disponibles
• Maximum capacity 6 000 lbs.
• Uses: Ideal for lifting heavy materials and equipment
• Add this electric hoist to your cart now

Clé à tube à chaîne 12po

Clé à tube à chaîne 24po

Clé à tube à chaîne 36po

Chain Wrench, Large

• Multi-use tool
• Available in multiple sizes
• Heavy-duty construction
• Facile à utiliser
• Uses: Ideal for holding or rotating smooth objects
• Add this chain wrench to your cart now

Circular Saw, 16 in., Electric Powered

• Lame à pointe au carbure16 5/16 po
• 15 amp motor and electric brake
• Profondeur de coupe de 90 degrés 6 3/16 po
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Cordless, Electric Powered

• Lame à extrémité en carbone 7 1/4 po
• Profondeur de coupe de 90 degrés 2 7/16 po
• Changements de lame rapides et faciles
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Electric Powered

• 15 amp motor, electric brake included
• Depth of cut 2-7/16" at 90 degrees
• Lame de 7 1/4 po
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Circular Saw, 7-1/4 in., Worm Drive, Electric Powered

• Hand-held operation
• Protection inférieure anti-accrocs pour une protection accrue
• Poignée douce et texturée pour le confort de l’opérateur
• Worm drive designed to give saw more torque than sidewinder saws
• Uses: Ideal for cutting through wood, stone and other materials where electric power is available
• Add this circular saw to your cart now

Circular Saw, 8 in., Metal, Electric Powered

• Outfitted to cut through metal materials
• Lame de 8 po
• Portable and easy to transport
• We have various blade types available
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this circular saw to your cart now

Pince en C 10 po standard

Pince en C 12 po standard

Pince en C 3 po standard

Pince en C 4 po standard

Pince en C 6 po profonde

Pince en C 6 po standard

Pince en C 8 po profonde

Pince en C 8 po standard

Pince à barre

Pince-étau de soudage 9 po

Palan manuel, 1 1/2 tonnes

• Contrôle et opération à une main faciles
• Une conception et une construction robustes, mais légère, il se transporte et se monte facilement, même dans les endroits les plus étroits.
• La fonctionnalité facile de chaîne libre permet une prise et un placement rapides d’une chaîne détendue. Conçu pour ne pas libérer accidentellement la chaîne lors de la charge.
• L’engrenage à double réduction, ainsi qu’une poignée courte et coussinée procure une opération facile, avec peu d’effort de manipulation.
• Les moufles à crochet supérieurs et inférieurs sont boulonnés, pour un retrait et une inspection faciles, et ont des loquets de sécurité forgés de série.
• L’acier estampé résistant aux chocs avec un revêtement en poudre pour une protection supplémentaire lors de travaux dans des environnements difficiles.
• Un frein de charge intégré, de type Weston, reste propre et sec pour un placement de charge positif.
• Respecte la norme ASME B30.21.
• Chaîne zinguée avec essai de charge 100 %
• Limiteur de charge

Palan manuel, 3 tonne

• Une conception et une construction robustes, mais légère, il se transporte et se monte facilement, même dans les endroits les plus étroits.
• La fonctionnalité facile de chaîne libre permet une prise et un placement rapides d’une chaîne détendue. Conçu pour ne pas libérer accidentellement la chaîne lors de la charge.
• L’engrenage à double réduction, ainsi qu’une poignée courte et coussinée procure une opération facile, avec peu d’effort de manipulation.
• L’acier estampé résistant aux chocs avec un revêtement en poudre pour une protection supplémentaire lors de travaux dans des environnements difficiles.
• Un frein de charge intégré, de type Weston, reste propre et sec pour un placement de charge positif.
• Respecte la norme ASME B30.21.
• Les moufles à crochet supérieurs et inférieurs sont boulonnés, pour un retrait et une inspection faciles, et ont des loquets de sécurité forgés de série.
• Chaîne zinguée avec essai de charge 100 %

Palan manuel, 6 tonne

• Une conception et une construction robustes, mais légère, il se transporte et se monte facilement, même dans les endroits les plus étroits.
• La fonctionnalité facile de chaîne libre permet une prise et un placement rapides d’une chaîne détendue. Conçu pour ne pas libérer accidentellement la chaîne lors de la charge
• L’engrenage à double réduction, ainsi qu’une poignée courte et coussinée procure une opération facile, avec peu d’effort de manipulation.
• L’acier estampé résistant aux chocs avec un revêtement en poudre pour une protection supplémentaire lors de travaux dans des environnements difficiles.
• Un frein de charge intégré, de type Weston, reste propre et sec pour un placement de charge positif.
• Les moufles à crochet supérieurs et inférieurs sont boulonnés, pour un retrait et une inspection faciles, et ont des loquets de sécurité forgés de série.
• Limiteur de charge
• Respecte la norme ASME B30.21.

Compound Miter Power Saw, Electric-powered, 12 in.

• Single bevel
• Stainless-steel miter detent plate and cam miter lock
• 4 000 tours/minute
• 15-amp motor
• Add this compound miter power saw to your cart

Concrete Core Drill, 17-23 amps, Electric Powered

• Drills up to 10" holes in concrete
• Monté sur appareil de forage
• 17-23 amps
• Built-in rollers for maneuverability
• Add this concrete core drill to your cart now

Concrete Cut-off Saw, 14 in., Gas Powered

• Profondeur de coupe pouvant aller jusqu’à 4,9 po
• Conception à faibles vibrations
• Poignées ajustables disponibles
• Suitable for indoor or outdoor cutting
• Uses: Ideal as your go-to tool for remodeling, construction when working with brick, concrete and stone
• Add this concrete saw to your cart now

Concrete Vibrator, 1-2 HP, Electric Powered

• 1-2 horsepower
• Lightweight and rugged
• Dust and waterproof switch
• Head sizes from 1-2,75 in. in diameter and flex shaft lenths from 3-30 ft.
• Uses: Ideal for use in low-slump concrete where consistent power is needed to move stiff mixtures
• Add this electric concrete vibrator to your cart now

Conduit Bender, 1-1/4 in. to 5 in., Powered

• De solides composantes peuvent accueillir des conduits de 1 1/4 po à 5 po
• Bélier facile à utiliser, format voyage
• Peut facilement construire des coudes, décalages et selles
• Durable steel jaws
• Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1-1/4" to 5" gauge
• Add this conduit bender to your cart now

Conduit Bender, 1/2 in. to 2 in., Powered

• Strong components can handle 1/2"-2" tubing
• Roues intégrées pour une maniabilité accrue sur le chantier
• Conception légère, mais durable et robuste
• Deluxe design
• Uses: Ideal for bending conduit, cable or tubes for elbows, offsets and saddles between 1/2" to 2" gauge
• Add this conduit bender to your cart now

Cordless Drill, Electric-powered, 1/2 in., 18V

• Gâchette de vitesse variable perfectionnée
• Mandrin de métal 1/2 po
• Légère, portative et facile à utiliser
• 1 800 tours/minute
• Add this cordless drill to your cart

Cordless Impact Right-angle Drill Driver, Lithium Ion, Dual-speed, 3/8 in.

• Compact design for easy reach in tight spaces
• Dual speed 0-650/0-2 000
• 3/8" chuck with deep hex pocket
• Multigrip trigger provides comfort and convenience
• Add this cordless impact right-angle drill driver to your cart

Cordless Portable Band Saw, Electric-powered

• 3 1/4 in. X 3 1/4 in. max. capacity (rectangular)
• Cuts: 2 1/2 in. conduit, 3 in. angle iron, 3 in. copper
• Perfect tool for cutting metal in place, overhead or in tight spaces
• Vibrations faibles
• Add this cordless portable band saw to your cart

Crowfoot Wrench Socket 1/2 in. Drive

• 1 13/16" or 46 mm deep
• Heavy-duty hardened steel
• Designed to be used with torque wrenches
• Torque down or loosen fasteners
• Add this crowfoot socket to your cart now

Coupe-câble, mou 2 po avec poignée de clé à cliquet 28 po

Demolition Breaker Hammer, 70 lbs., Electric Powered

• Single-impact energy; weighs 49 lbs.
• Lowest hand-arm vibration in weight class
• Universal motor with protective insulation
• Heavy-duty construction
• Uses: Ideal for breaking and demolition of cement, rock and asphalt
• Add this demo hammer to your cart now

Demolition Breaker Hammer, Electric-powered, 60 lbs.

• 60 lbs. estimated energy impact
• Vibration-dampened controls for easy operation
• 10-gauge extension cord required for operation
• Use Cases: Designed for breaking concrete slabs, floors, walls, sidewalks, stones, brickwork, frozen ground, heavy clay and asphalt
• Add this demolition breaker hammer to your cart
• Additional charges apply for points, chisels and miscellaneous tool steel
• United Rentals will contact you to confirm requirements

Demolition Breaker Jack Hammer Kit, Electric-powered, 35 lbs.

• 35 lbs. impact force
• Versatile two-way bit accepts 1 1/8" hex steel and standard 1 1/8" air steel
• Vibration control technology shock reduction in hammer mechanism and at handle
• Carrying case with wheels offers convenient storage and easy transportation
• Add this demolition breaker jack hammer kit to your cart

Demolition Hammer Tile Stripping Cart, 35 lb. Weight Class

• Multiposition, foldable operator handle
• Fits popular models from Bosch, DEWALT, Hilti, Hitachi and Makita
• 12" maximum blade-cutting width
• Use Cases: Mounts to a wide range of 35 lb. weight class electric breaker, not included
• Add this demolition hammer tile stripping cart to your cart
• United Rentals will contact you to confirm availability and price of demolition hammer

Demolition Hammer, Electric-powered, 15,5 lbs. Single Impact Energy

• 1 890 impacts per minute
• Optimized performance-to-weight ratio for high productivity
• Ideal for heavy demolition on masonry and brick walls and removing plaster and tile
• Active vibration reduction makes the tool less tiring to use
• Add this demolition hammer to your cart

Demolition Hammer, Electric-powered, 8,5 lbs. Single Impact Energy

• Jusqu’à 2760 ipm
• Optimized performance-to-weight ratio for high productivity
• Ideal for heavy demolition on masonry and brick walls and removing plaster and tile
• Active vibration reduction makes the tool less tiring to use
• Add this demolition hammer to your cart

Diffuser Balloon Light With Stand, 400 Watt

• Single 400 watt lamp (34 000 lumens)
• 360-degree glare-free lighting
• Air-assist mast-lowering system protects light bulb
• Quick and easy setup; balloon inflates in less than 30 seconds
• Add this diffuser balloon light with stand to your cart

Diffuser Balloon Light With Stand, LED Lamp

• Diffuser is constructed of heat- and water-resistant UV-protected nylon
• 360-degree glare-free lighting
• Air-assist mast-lowering system protects light bulb
• Quick and easy setup; balloon inflates in less than 30 seconds
• Add this diffuser balloon light with stand to your cart

Disc Grinder, 5 in., Electric Powered

• Comfortable wraparound auxiliary handle
• Dustless shroud included
• Légère et portative
• Grinder wheel width 5"
• Uses: Ideal for weld preparation and smoothing, rust removal, deburring and blending
• Add this grinder to your cart now

Drill Press Magnetic 1-1/2 in., Electric Powered

• Versatile, MT 3 capable, uses 3/4" shank cutters
• Up to 450 rpm, 115 to 120V electric powered
• Smart Magnet™ circuitry for safe drilling on marginal surfaces
• Use Cases: Magnetic base drilling
• Add this magnetic base drill press to your cart
• Rental does not include drill bits
• United Rentals will contact you to confirm your requirements

Drill Press, 1/2-1 in.

• Précise, stable et polyvalente
• Entraînement à courroie ou variable
• Column-to-spindle distance: 7 1/2-10 in.
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill Press, Magnetic Base, 1/2 in., Pneumatic Powered

• Pneumatic powered
• Magnetic holding strength: 1 600 lb
• Légère et portative
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill Press, Magnetic, 3-4 in.

• Drills holes from 7/16-2 3/8 in.
• Easy-to-change feed side
• Deux vitesses disponibles
• Heavy-duty construction
• Uses: Ideal for drilling metal as well as threading, reaming and countersinking applications
• Add this drill press to your cart now

Drill, 1/2 in., Electric Powered

• Compact et portative
• Mandrin à clé, jusqu’à 3/8 po disponible
• Tours/minute à vitesse simple ou double
• Two-postion pipe handle
• Uses: Ideal for making holes in wood large enough to accomdate piping
• Add this drill to your cart now

Drop Light, Explosion Proof, 110V Electric Powered

• Durable construction designed to not shatter
• Ideal for temporary indoor or outdoor work lighting
• Extra long power cord
• Plugs into a standard outlet
• Add this work light to your cart now

Electric Drill, 3/4 in., Top and D-handle

• 3/4" chuck
• 10-amp motor, 375 no load rpm
• Triple gear reduction
• Full-power forward and reverse
• Add this electric drill to your cart

Marteau rotatif électrique, grande cannelure

• Léger pour le confort de l’opérateur
• Impact élevé avec vibration réduite
• Poignée auxiliaire pour plus de stabilité
• Requires 110V and 10 amps
• Uses: Ideal for breaking through concrete, asphalt, brick and stone
• Add this rotary hammer to your cart now

Evaporative Cooling Fan, 12 in.

• Portable and durable
• 12 po diamètre
• Fluid air circulation for efficient cooling
• Electric powered
• Uses: Ideal for efficient spot cooling in warm business, construction or industrial spaces
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Evaporative Cooling Fan, 16-18 in.

• Diameter 16"-18"
• Caster wheels available for portability
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• Add this portable cooling fan to your cart now

Evaporative Cooling Fan, 36 in., Explosion Proof

• Diameter 36" for heavy-duty spot cooling
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• Add this portable cooling fan to your cart now

Evaporative Cooling Fan, 48 in.

• Diameter 48" for heavy-duty spot cooling
• Caster wheels available for portability
• Ideal for portable cooling jobsites
• Manufacturers include Portacool Evaporative Coolers and other popular brands
• Uses: Ideal for efficient spot cooling in dry climates
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Evaporative Cooling Trailer

• Portable for convenient relocation
• Come in various sizes
• Industrial strength for durability
• Misting fans included
• Uses: Ideal for efficient spot cooling on construction or industrial jobsites
• Add this trailer to your cart now

Flange Spreader Toe Ratchet, 15 Ton

• 15-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Easy to control
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this flange spreader jack to your cart now

Flange Spreader Toe Ratchet, 5 Ton

• 5-ton capacity
• Heavy-duty and reliable
• Sturdy steel wedge for safe splitting
• Légère et facile à utiliser
• Uses: Spreading or separating heavy pipe flanges for petrochemical, refining, pipeline, power generation and other applications
• Add this flange spreader jack to your cart now

Hacksaw, Manual

• Légère et facile à utiliser
• Designed for light-duty cutting
• Ideal for cutting metal
• Multiple saw lengths available
• Uses: Ideal for cutting through narrow metal piping or other materials manually
• Add this hacksaw to your cart now

Marteau à panne ronde 12 oz

Marteau à panne ronde 16 oz

Marteau à panne ronde 24 oz

Marteau à panne ronde 32 oz

Marteau à panne ronde 32 oz en laiton

Marteau à panne ronde 48 oz

Marteau à panne ronde 8 oz

Marteau pointe biseautée 18 po

Marteau à panne fendue

Marteau à pince courbée de 20 oz

Marteau de frappe

Marteau de frappe 10

Marteau de frappe 10 lb laiton

Marteau de frappe 11,5 poly

Marteau de frappe 12

Marteau de frappe 15 lb laiton

Marteau de frappe 16

Marteau de frappe 2lb acier

Marteau de frappe 20

Marteau de frappe 3 lb laiton

Marteau de frappe 3 poly

Marteau de frappe 3lb acier

Marteau de frappe 4

Marteau de frappe 4 lb laiton

Marteau de frappe 5 lb laiton

Marteau de frappe 6

Marteau de frappe 6 lb laiton

Marteau de frappe 7,5 lb laiton

Marteau de frappe 8

Marteau de frappe 8 lb laiton

Marteau à écailler de soudeur avec poignée et câble

Hand Saw, Carpentry

• Légère et facile à utiliser
• D-handle with comfortable grip
• Designed for woodcutting
• Blade lengths vary
• Uses: Ideal for woodwork and construction
• Add this hand saw to your cart now

Hand-held Rotary Bristle Tool, Electric Powered

• Powerful bristle brush for hard-to-reach areas
• Removes corrosion and coating without grinding
• Imparts profile of 2,7- 3,3 mil
• Designed for use on metal pieces
• Uses: Ideal for removing coatings or corrosion from metal in narrow areas
• Add this bristle tool to your cart now

Scie à béton pneumatique manuelle, 14 à 18 po

• Profondeur de coupe pouvant aller jusqu’à 7 po
• Uses 12-18 in. blades
• Low maintenance and easy to operate
• Ideal for indoor and outdoor use
• Uses: Ideal for cutting concrete, brick, asphalt and other solid materials
• Add this handheld saw to your cart today

Handheld Die Grinder, Electric-powered, 1 1/2 in., 25 000 rpm

• 25 000 rpm no load speed
• 4,2 amps
• AC/DC capacity works off welding machines and generators for increased productivity and versatility
• 1/4" collet spindle thread
• Add this handheld die grinder to your cart

Handheld Die Grinder, Electric-powered, 2 in., 19 000 rpm

• 19 000 rpm no load speed
• 5 amps
• AC/DC capacity works off welding machines and generators for increased productivity and versatility
• 1/4" collet and 1/8" sleeve spindle thread
• Add this handheld die grinder to your cart

Handheld Explosion-Proof Light, Inline Transformer

• Step down transformer
• Durable glass dome and cage
• Long power cord length
• Portable and lightweight
• Add this work light to your cart now

Handheld Variable High-speed Drill, 1/2 in.

• Variable speed and soft grip trigger, with reversing switch for greater control
• Two-finger trigger design and lock-on button for ease of operation
• 360°-auxiliary handle with optional depth gauge
• Ergonomic handle with soft grip for increased comfort
• Add this handheld variable high-speed drill to your cart

Hole Saw Kit, 1/2 in.-4 in.

• Designed to saw holes in wood, metal or plastic
• Designed to saw holes in wood, metal or plastic
• Wear-resistant and durable
• Ideal for cutting holes for doorknobs and similar
• Uses: Ideal for sawing holes for doorknobs or for conduit
• Add this hole sawing kit to your cart now

Clé dynamométrique pour tuyau hydraulique de 15 pi

Hydraulic Hole Punch Set, 25-35 Tons

• Includes various diameter pieces
• Wear-resistant and durable
• Ideal for punching holes in metal and other tough materials
• Requires hydraulic power
• Uses: Ideal for punching holes in metal and other materials in various diameters
• Add this hole punch tool to your cart now

Impact Socket Adapter, 1 in. Drive (F) to #5 Spline Drive (M)

• Strong, heavy-duty steel
• Enables #5 spline drive tools to use 1" drive accessories
• Designed for #5 drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 1/2 in. Drive (F) to 3/4 in. Drive (M)

• Strong, heavy-duty steel
• Enables 3/4" drive tools to use 1/2" drive accessories
• Designed for 3/4" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 3/4 in. Drive (F) to 1/2 in. Drive (M)

• Strong, heavy-duty steel
• Enables 1/2" drive tools to use 3/4" drive accessories
• Designed for 1/2" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Socket Adapter, 3/8 in. Drive (F) to 1/2 in. Drive (M)

• Strong, heavy-duty steel
• Enables 1/2" drive tools to use 3/8" drive accessories
• Designed for 1/2" drive ratchet, extension or torque wrench
• United Rentals will contact you to confirm requirements
• Uses: Ideal for light- to medium-duty construction, automotive or industrial applications
• Add this impact socket adapter to your cart now

Impact Wrench, 1 in., Electric Powered

• Up to 738 ft.-lbs. of torque in forward or reverse
• Poignée ergonomique pour le confort de l’opérateur
• 1 500 bpm impact system for less vibration
• Légère, facile à utiliser et portative
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 1" drive
• Add this impact wrench to your cart now

Impact Wrench, 1/2 in., Cordless Electric Powered

• Up to 450 ft.-lbs. of torque
• Légère et portative
• Up to 3 000 beats per minute, variable speed trigger available
• Détente ergonomique
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 1/2" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/4 in., Cordless Electric Powered

• Between 200-345 ft.-lbs. of torque
• Légère et portative
• Ideal for torqueing fasteners like nuts and bolts
• Détente ergonomique
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/4" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/4 in., Electric Powered

• Up to 450 ft.-lbs. of torque in forward or reverse
• Légère, facile à utiliser et portative
• Poignée ergonomique et poignée latérale pour le confort de l’opérateur
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/4" drive
• Add this impact wrench to your cart now

Impact Wrench, 3/8 in., Cordless Electric Powered

• Between 200-345 ft.-lbs. of torque
• Légère et portative
• Ideal for torqueing fasteners like nuts and bolts
• Détente ergonomique
• Uses: Ideal for torqueing and loosening bolts and other fasteners with 3/8" drive
• Add this impact wrench to your cart now

Industrial Pedestal Fan, 24 in.

• Diameter 24" for medium-duty spot cooling
• Oscillating models available
• Ideal for cooling indoor jobsites
• Footprint can fit in a narrow area compared to comparable box fans
• Uses: Ideal for spot cooling warehouses or indoor jobsites
• Add this fan to your cart now

Industrial Pedestal Fan, 30 in.

• Diameter 30" for medium-duty spot cooling
• Oscillating models available
• Ideal for cooling indoor jobsites
• Footprint can fit in a narrow area compared to similar box fans
• Uses: Ideal for spot cooling
• Add this fan to your cart now

Jigsaw, Cordless, Electric Powered

• Système de changement de lame sans outils
• Le levier d’éjection de la lame supprime le besoin de toucher à une lame chaude
• Léger, facile à utiliser et portatif
• Ideal for cutting angles and curves in wood or metal
• Uses: Ideal as your go-to tool for remodeling, construction when working with wood, brick and stone; personal and commercial use
• Add this jigsaw to your cart now

Jigsaw, Electric Powered

• Système de changement de lame sans outils
• Le levier d’éjection de la lame supprime le besoin de toucher à une lame chaude
• Léger, facile à utiliser et portatif
• Ideal for cutting angles and curves in wood or metal
• Uses: Ideal for cutting curves or angles when electric power is available
• Add this jigsaw to your cart now

Niveau laser

• Précision au 1/16 po à 100 pi
• Hand-held or rod-mounted receiver, machine mountable
• Convenient, one-person operation
• Durable and resistant to breaks even at falls from 5' height
• Uses: Ideal for measuring elevation, angles of excavations and concrete pours
• Add this laser level to your cart now

LED Light Stand, 1 by 150W, Explosion Proof

• High efficiency LED bulbs
• Directional lighting
• Antidéflagrante
• Heavy-duty metal construction
• Uses: Ideal for lighting a construction jobsite or event at night and adding lighting during a planned shutdown
• Add this light stand to your cart now

Machine Skate, 15 Tons

• Low-profile, high-capacity rollers with endless chain action design
• Pivots inclus
• Facile à utiliser
• Respecte les normes de l’ANSI
• Add this machine skate to your cart now

Magnetic Base Drill Press, 2-in. Driller Depth

• 2-3" cutter drilling depth, 1 1/2" cutter diameter"
• Uniform-torque motor for demanding core drilling
• 2 1/2" stroke
• Construction massive solide en aluminium moulé sous pression pour les travaux en conditions difficiles.
• Add this magnetic base drill press to your cart

Magnetic Base Drill Press, 2-in. Driller Depth

• 2" drilling depth, 1 1/16" core bit diameter
• 2-speed gearbox with continuously variable electronic speed reduction
• 5,3-12,2" stroke available
• Low-profile design for drilling in close quarters
• Add this magnetic base drill press to your cart

Manual Chain Hoist, 1 Ton

• Limiteur de charge
• Une chaîne de charge durcie procure une puissance et une résistance supplémentaires, pour une plus longue durée de vie de la chaîne.
• Designed for easy inspection and maintenance
• 360-degree swivel hooks with safety latches for positive load engagement
• Add this chain hoist to your cart now

Manual Chain Hoist, 1,5 Ton

• Includes load limiter
• Une chaîne de charge durcie procure une puissance et une résistance supplémentaires, pour une plus longue durée de vie de la chaîne.
• Designed for easy inspection and maintenance
• 360-degree swivel hooks with safety latches for positive load engagement
• Uses: Ideal for lifting heavy loads in manufacturing, agriculture, construction and more
• Add this chain hoist to your cart now

Manual Chain Hoist, 2 Tons

• Construction en acier robuste
• Résistant à la corrosion
• Chaînes de levage et crochets en acier
• Protection contre les surcharges disponibles
• Uses: Ideal for lifting heavy loads in manufacturing, agriculture, construction and more
• Add this chain hoist to your cart now

Manual Chain Hoist, 3 Tons

• Construction en acier robuste
• Résistant à la corrosion
• Chaînes de levage et crochets en acier
• Protection contre les surcharges disponibles
• Add this chain hoist to your cart now

Manual Chain Hoist, 5 Tons

• Construction en acier robuste
• Résistant à la corrosion
• Chaînes de levage et crochets en acier
• Protection contre les surcharges disponibles
• Add this chain hoist to your cart now

Compteur à pince

MIG Welder Suitcase Kit, MPA

• Include high-frequency arc starter and stabilizer
• Enhances flexibility and performance
• Élargit la capacité de l’équipement
• Unité portative
• Uses: Ideal for MIG or gas metal arc welding (GMAW)
• Add this MIG welder to your cart now

Multiprocess CC Arc Welder DC to AC Inverter, 350 amp

• Converts DC to AC power for multiple welding applications
• 348 A
• Portatif, avec poignée
• Low amp operation available
• Uses: Ideal for worksites using multiple types of metal and requires use of stick, MIG, TIG, FCAW, and CAC-A welding
• Add this mulitprocess CC arc welder DC to AC rectifier to your cart

Orbital Floor Sander, 5 in., Electric Powered

• Dessus texturé antidérapant et poignées sur le corps
• Dessus texturé antidérapant et poignées sur le corps
• High-capacity dust bag available
• 5" sanding width
• Uses: Ideal for complete leveling and sanding for remodeling or construction purposes
• Add this orbital sander to your cart now

Orbital Floor Sander, Electric Powered

• Conception à faibles vibrations
• Poignée confortable pour l’opérateur
• Légère et facile à utiliser
• Ideal for heavy-duty sanding
• Uses: Ideal for heavy-duty sanding on hardwood flooring
• Add this orbital sander to your cart now

Outdoor Work Light String, 12V Explosion Proof

• Bulb cases included
• Explosion proof durability
• Ideal for industrial applications
• Up to 5 light bulb sockets
• Add this work light string to your cart now

Pipe Bender, 1/2 in. to 2 in., Electric Powered, Programmable

• Strong components can handle 1/2"- to 2"-gauge pipe
• Programmable
• Peut facilement construire des coudes, décalages et selles
• Cart travels well on wheels for increased convenience
• Uses: Ideal for bending pipes or conduit for elbows or offsets between 1/2" to 2" gauge
• Add this pipe bender to your cart now

Pipe Bender, 2-1/2 in. to 4 in., Hydraulic

• Strong components can handle 2-1/2"- to 4"-gauge pipe
• Convenient extendable workspace
• Heavy-duty hydraulic power
• Peut facilement construire des coudes, décalages et selles
• Uses: Ideal for bending pipes 2-1/2" to 4" gauge where hydraulic power is available
• Add this hydraulic pipe bender to your cart now

Pipe Beveling Manual Saddle Machine, 12-20 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Pipe Beveling Manual Saddle Machine, 20-26 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Pipe Beveling Manual Saddle Machine, 6-12 in.

• For shop or field applications
• Precision spacer bolts, located on both sides of saddle
• Can be used with most oxy/fuel or plasma machine torches
• Use to create the angle formed between the edge of the end of a pipe or tube
• Uses: For critical pipe applications, such as oil and gas pipelines that require a high degree of cut quality and accuracy
• Add this pipe beveling manual saddle machine to your cart

Pince à conduite d’alignement 1 po à8 po

Pince à conduite d’alignement 10 po à 36 po

Pince à conduite d’alignement 14 po à 24 po

Pince à conduite d’alignement 6 po à 12 po

Pipe Conduit Bender Table, 4 in., Greenlee 881

• Strong components can handle up to 4"-gauge pipe
• Convenient extendable workspace
• Locking swivel wheels
• Conveniently adjust the ram to accommodate different sizes of conduit
• Uses: Ideal for bending rigid conduit on the go
• Add this pipe bender table to your cart now

Pipe Dolly

• Enables one operator to lift up to 2 000 lbs.
• Accommodates long and short pipes and conduit
• Fits through most standard doorways
• Heavy-duty and reliable construction
• Uses: Ideal for manually transporting lengths of pipe and conduit to the correct location for pipe fitting
• Add this pipe dolly to your cart now

Pipe Fusion Machine 6-18 in., Tracks Included

• Fuse small- to medium-diameter pipes or conduit together
• Tracks included for setup in muddy or wet conditions
• Designed for fusing 6"-18" diameter polyethylene pipes
• For utilities work such as sewer or plumbing pipes
• Uses: Ideal for fusing polyethylene pipes together for utility work in muddy or wet conditions
• Add this pipe fusion machine to your cart now

Pipe Fusion Machine 6-18 in., Wheels Included

• Fuse small- to medium-diameter pipes or conduit together
• Wheeled chassis included for maneuvering around the jobsite
• Designed for fusing 6"-18" diameter polyethylene pipes
• For utilities work such as sewer or plumbing pipes
• Uses: Ideal for fusing polyethylene pipes together for utility work
• Add this pipe fusion machine to your cart now

Balai électrique pour tuyau

• Conveniently battery powered
• Inspect the coatings of piping and conduit for holes
• Designed to read voltages even in rainy conditions
• Volt cable included
• Uses: Detect holes in coatings of pipes or conduit
• Add this jeep meter to your cart now

Laser de tuyau

• Steep grade option available, "rake-in" up to 100%
• Line range of 20 degrees
• Pente de -15 % à +40 %
• Facile à utiliser
• Uses: Inspect piping or conduit for grade
• Add this pipe laser to your cart now

Pipe Roller, Horizontal Beam, 24 in.

• Pipe diameter 24"
• Two rollers
• Cadre en acier robuste
• Two rollers
• Uses: Ideal for horizontal conveyance of pipes up to 24" wide
• Add this pipe roller to your cart now

Pipe Threader, 1/2 in. to 2 in., Portable, 115V Electric Powered

• Capacité du tuyau : 1/8"-2" (3mm-50mm) pipe, 2-1/4"-4" with 141, and 4"-6" with 161 geared threaders; 1/4"-2" (6mm-50mm) rod
• 115V, 38 RPM
• Rear-centering device: L’action à came tourne avec un mandrin
• Commutateur en marche/en arrêt/inverse encastré
• Uses: Thread 1/2" to 2" gauge pipe in the shop or on-site
• Add this pipe threader to your cart now

Pipe Threader, 1/2 in. to 4 in., Electric Powered

• Capacités d’enfilage de 1/2 po à 4 po
• Lubrification constante des filières et de la pièce avec un huilage à travers tête
• Construction robuste
• Interrupteur au pied intégral pratique
• Uses: Thread 1/2" to 4" gauge pipe or conduit in the field or in the shop
• Add this pipe threader to your cart now

Clé à tube 10 po

Clé à tube 10 po droite en aluminium

Clé à tube 12 po

Clé à tube 14 po droite en aluminium

Clé à tube 14 po droite, robuste

Clé à tube 18 po

Clé à tube 18 po droite en aluminium

Clé à tube 24 po

Clé à tube 24 po droite en aluminium

Clé à tube 36 po

Clé à tube 36 po droite en aluminium

Clé à tube 48 po en vrac

Clé à tube 48 po droite en aluminium

Clé à tube 6 po

Clé à tube 8 po

Chaîne de clé à tube

Courroie de clé à tube, 8 po

Plate Clamp, 3 Ton, Positive Lock

• Forged head and gearing
• 2-to-1 safety factor
• Durable high-grade steel construction
• Industrial-strength coated finish
• Uses: Ideal for heavy lifting
• Add this plate clamp to your cart today

Étau avec verrouillage 11 po et pince en C

Portable Band Saw, Electric Powered

• Coupe jusqu’à 3-3/4 po sur des matériaux rectangulaires et ronds
• Maintient une vitesse de lame stable et optimale
• Features all ball and roller bearing construction
• Low vibration for increased comfort
• Uses: Ideal as your go-to tool for remodeling, construction when working with plates, pipes and other jobsite materials
• Add this band saw to your cart now

Portable Drum Fan, 42 in.

• High-capacity fan blasts hot, stagnant air from large areas
• Complete metal housing with spiral wire safety guards
• Aluminum blades
• Able to tilt and direct air
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Portable Hydraulic Power Pack and Pump

• Provide hydraulic power to other equipment and tools
• Pression de 2 100 à 20 000 lb/po²
• Output up to 8 gallons per minute (GPM)
• Trousse sur roues disponible pour faciliter le transport
• Uses: Take portable hydraulic power to your worksite to plug in hydraulic tools
• Add this hydraulic power pump to your cart now

Portable Indoor/Outdoor Evaporative Cooling Fan, 24-36 in.

• Recommended for stage events, hospitality tents and auto repair shops
• Variable speeds
• Built-in water tanks for portable cooling or connect to a garden hose for all-day use
• Evaporative cooler uses approximately the same amps as a standard wet/dry vacuum
• If you’re ready to rent this product, set your location to add it to your cart. If you need assistance, click the orange “Request Information” button to contact a Climate Solutions representative.

Portable Masonry and Tile Saw, Gas- or Electric-powered, 14 in. or 20 in.

• 14" and 20" blade guard capacity models available
• Standard rear-wheel dolly design and removable legs make transport and setup easy
• Rugged jig-welded frame
• Stay-level blade guard allows for full depth of cut
• Add this portable masonry and tile saw to your cart

Portable Straight Grinder, 2-1/2 in.

• Boîtier de la tige enduite pour une préhension plus froide
• Jusqu’à 14 500 tours/minute
• 2-1/2"-3" diameter wheel
• Hand-held grinder for narrow areas such as inside piping, for buffing and more
• Uses: Ideal for grinding or buffing in narrow areas
• Add this portable grinder to your cart now

Portable Ventilating Blower, Electric-powered, 12 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Super quiet 
• Add this portable ventilating blower to your cart

Portable Ventilating Blower, Electric-powered, 20 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Non-explosion-proof
• Add this portable ventilating blower to your cart

Portable Ventilating Blower, Electric-powered, 20 in. Axial Fan, 115V-230V

• For use in large, confined spaces
• Lightweight, portable and durable
• Bottom enclosure to protect electrical components 
• Explosion-proof
• Add this portable ventilating blower to your cart

Ensemble de tournevis de précision

Radio Repeater, Digital, 450MHz, Antenna, 100 ft. Transmission Line

• Expand the range of your compatible two-way radio
• With antenna
• Has a 100' transmission line
• Uses: Ideal for use with portable analog and digital radios

Clé à cliquet 1 po

Clé à cliquet 3/4 po

Clé à cliquet 3/8 po

Maillon de clé à cliquet 1 1/4 po 243 à 1687 pi/lb

Maillon de clé à cliquet 1 13/16 po 243 à 1687 pi/lb

Maillon de clé à cliquet 1 13/16 po 580 à 3855 pi/lb

Maillon de clé à cliquet 1 5/8 po 243 à 1687 pi/lb

Maillon de clé à cliquet 1 5/8 po 580 à 3855 pi/lb

Maillon de clé à cliquet 1 7/16 po 243 à 1687 pi/lb

Maillon de clé à cliquet 2 15/16 po 580 à 3855 pi/lb

Maillon de clé à cliquet 2 3/16 po 243 à 1687 pi/lb

Maillon de clé à cliquet 2 3/16 po 580 à 3855 pi/lb

Maillon de clé à cliquet 2 3/4 po 580 à 3855 pi/lb

Maillon de clé à cliquet 2 3/8 po 243 à 1687 pi/lb

Maillon de clé à cliquet 2 3/8 po 580 à 3855 pi/lb

Maillon de clé à cliquet 2 9/16 po 580 à 3855 pi/lb

Maillon de clé à cliquet 2 po 243 à 1687 pi/lb

Maillon de clé à cliquet 2 po 580 à 3855 pi/lb

Maillon de clé à cliquet 3 1/8 po 1143 à 8151 pi/lb

Maillon de clé à cliquet 3 7/8 po 2010 à 13400 pi/lb

Reciprocating Saw, Cordless, Electric Powered

• High-powered motor
• 28V battery twice the runtime as 18V battery models
• 1-1/8" stroke length for fast cutting speeds
• La position de la batterie ne nuit pas aux capacités de coupe forée.
• Uses: Ideal as your go-to tool for remodeling, construction and demolition
• Add this reciprocating saw to your cart now

Reciprocating Saw, Electric Powered

• Gâchette à vitesse variable pratique
• Système de changement de lame sans outils
• Légère et facile à utiliser
• Poignée ergonomique
• Uses: Ideal as your go-to tool for remodeling, construction and demolition
• Add this reciprocating saw to your cart now